Welcome to Dr. Virender Sheorain+91 88515 55239info@vasculardoctorindia.comMedanta – The Medicity, Gurugram

Fistuloplasty: Opening a Narrowed or Blocked Dialysis Fistula

Fistuloplasty is a balloon procedure that widens a narrowed dialysis fistula through a needle puncture, usually under local anaesthesia, so dialysis can continue without a new operation. Dr. Virender Sheorain performs fistuloplasty at Medanta, Gurugram, and most patients go home the same day.

To be reviewed by Dr. Virender Sheorain, MBBS, MD (Radio-Diagnosis), FSIR. Registered with Haryana Medical Council, Reg. No. HN6490Last updated:
Fistuloplasty at a glance
What it treatsNarrowed, clotted or non-maturing AV fistula or graft
AnaesthesiaLocal anaesthesia
Entry pointNeedle puncture in the fistula or graft
Time takenUsually 30–90 minutes
Hospital stayUsually same day
Back to routineSame or next day; dialysis often possible soon after

What is fistuloplasty?

Fistuloplasty is a balloon angioplasty of a dialysis fistula, for people on dialysis whose fistula has narrowed and is not giving good flow. It is also called AV fistula angioplasty.

An AV fistula is a joining of an artery and a vein, usually in the arm, made so the vein becomes strong enough for dialysis needles. Over months or years, part of the vein can narrow. Doctors call this a stenosis. Blood then cannot flow freely, and dialysis stops working as well as it should.

In fistuloplasty, a small balloon is passed into the narrowed part through a needle puncture and gently inflated. This stretches the vein open again. There is no open cut and no new fistula.

Signs your fistula is narrowing or failing

The early signs of a narrowing are often picked up by you or by the dialysis team before the fistula stops completely. Acting early gives the best chance of keeping your fistula.

What you may notice What the dialysis team may notice
The buzz (thrill) you feel over the fistula is weaker, or feels like a pulse instead of a buzz High venous pressure on the machine (the pressure of blood returning to you)
Bleeding from the needle sites takes much longer to stop Low blood flow, or the machine alarms often
Arm, hand or breast swelling on the fistula side Clots in the dialysis lines
A new hard or painful area along the vein Dialysis results getting worse, even with full sessions
A new fistula that is still small or soft weeks after it was made Trouble putting the needles in

The “thrill” is the gentle buzz you feel when you place your fingers on the fistula. It comes from fast blood flowing from the artery into the vein. A change in the buzz is a reason to call. You can read more about all the common problems on AV fistula problems.

What happens if a fistula is blocked?

A fistula that has suddenly stopped working, with no buzz at all, is urgent and needs a same-day call. It has usually clotted, often on top of a narrowing.

If the clot is recent, it can sometimes be cleared and the narrowing opened in the same procedure. This is called a declot or thrombectomy. The sooner it is treated, the better the chance.

If the fistula cannot be saved, you may need a Permacath for dialysis while a new fistula is planned. Missing dialysis is not safe, so the team will make sure you have a way to have it.

Urgent: If the buzz in your fistula has stopped, call your dialysis unit or Dr. Sheorain’s OPD the same day. Do not wait for your next session. If you are breathless, very weak or have chest pain because dialysis has been missed, go to the nearest emergency department.

How fistuloplasty is done, step by step

Fistuloplasty is done through a needle puncture with X-ray guidance, usually under local anaesthesia, and the whole visit is often finished in a day. Here is what usually happens:

  1. Fistulogram first. A small needle goes into the fistula and dye is injected. X-ray pictures (a fistulogram) show exactly where the narrowing is and how tight it is.
  2. Numbing. The skin over the fistula is numbed with local anaesthesia. Light sedation is given if needed.
  3. Balloon in place. A thin wire is passed across the narrowing, and a small balloon slides over the wire into the tight segment.
  4. Opening the narrowing. The balloon is inflated for a short time, then let down. This may be repeated. Some people feel an ache in the arm while the balloon is inflated, which settles when it is let down.
  5. Stent if needed. If the vein springs back or narrows again quickly, a small mesh tube (stent) or covered stent may be placed to hold it open.
  6. Check and finish. A final picture checks the flow. The tube is removed and pressure is applied, sometimes with a small stitch.

It usually takes about an hour. Many patients go home the same day, and dialysis can often continue as planned.

Fistuloplasty or a new fistula?

For most narrowings, fistuloplasty is worth trying first, because it keeps the fistula you already have and avoids waiting for a new one to mature. A new fistula is the better choice when the old one cannot be repaired.

Dr. Sheorain does both. He opens narrowed fistulas, and he also creates new ones, by a small operation on the arm or through a needle. So he can tell you honestly which route suits your arm.

Fistuloplasty New fistula
When it suits A narrowing in a fistula that is otherwise healthy The old fistula cannot be repaired, keeps failing, or is infected
How it is done Balloon through a needle puncture Small operation on the arm, or through a needle for suitable veins
Back to dialysis Usually straight away with the same fistula After the new fistula matures, often 6 weeks or more; a catheter may be needed meanwhile
Can it be repeated Yes, if the narrowing returns A fistula can be made again in another place if veins allow

Read more about a new fistula and how it is made.

Why fistuloplasty may need repeating

Narrowings in a fistula can come back over months, so some people need more than one fistuloplasty over the years. This is common and does not mean the first procedure failed.

The vein is under constant high flow and gets needles several times a week. That keeps irritating the wall, which can narrow again. Regular checks by the dialysis unit catch a narrowing early, before it blocks the fistula. Each repeat procedure is done the same way.

Who fistuloplasty is not right for

Fistuloplasty is not the right step for every failing fistula, and sometimes another treatment or another specialist is the safer choice. It may not suit you if:

  • the fistula is infected, which needs antibiotics and sometimes surgery first
  • the fistula has been clotted for a long time, so the clot is old and firm
  • the fistula has a large bulge (aneurysm) with thin, shiny skin over it, which may need surgical repair
  • the vein is too damaged along its length to hold open

Risks

Fistuloplasty is a common and generally low-risk procedure, but no procedure is free of risk. Possible problems include:

  • Bruising or a small swelling at the puncture site
  • Pain in the arm during balloon inflation, which settles
  • Re-narrowing over time, which may need another procedure
  • Rarely, a tear in the vein. This is usually managed during the same procedure, for example with a covered stent
  • Rarely, the fistula clots after the procedure

Your first visit

At your first visit, Dr. Sheorain checks how your fistula is working and what is causing the problem.

  1. Bring: your dialysis unit’s notes, recent machine pressures, any fistulogram or Doppler report, and your medicines.
  2. Examine: he feels and listens to the fistula, and may do a Doppler scan.
  3. Plan: fistuloplasty, a clot procedure, a new fistula, or simply watching, with the reasons explained.

Medanta Vascular OPD: Floor 5, Vascular OPD, Medicity, Islampur Colony, Sector 38, Gurugram, Haryana 122001. Monday to Saturday, 9:00 AM to 5:30 PM. See how to reach the Vascular OPD, Dr. Virender Sheorain’s training and the dialysis access hub.

Common questions about fistuloplasty

What happens if a fistula is blocked?

Call your dialysis unit or the specialist the same day. A fistula that has recently clotted can sometimes be cleared and opened again. If it cannot, you may need a catheter for dialysis while a new fistula is planned.

Is fistuloplasty a major surgery?

No. It is done through a needle puncture with a balloon, usually under local anaesthesia, with no open cut. Many patients go home the same day.

What is the "rule of 6" for fistulas?

It is a guideline doctors use to judge whether a new fistula is ready for dialysis, at about six weeks after it is made. The fistula should be about 6 mm wide, lie less than about 6 mm under the skin and carry a good blood flow (often given as more than 600 mL a minute). Your team checks your own fistula by examination or Doppler.

Will I need fistuloplasty again?

Some patients do, because narrowings can return over time. Regular checks at dialysis help catch them early, and a repeat procedure is done the same way.

Can I have dialysis on the same day?

Often, yes, because the same fistula can usually be used straight away. Your dialysis unit and Dr. Sheorain will plan the timing of your next session before the procedure.

Sources

This page follows these patient resources and guidelines:

Related

  • AV Fistula Problems

    A fistula that is blocked, narrowed or not maturing.

    Learn more →
  • Dialysis Access

    Keeping your fistula, graft or dialysis catheter working.

    Learn more →
  • Permacath Placement

    A long-term dialysis catheter placed through a small puncture.

    Learn more →

Who performs this procedure

Dr. Virender Sheorain, Director, Peripheral Vascular & Endovascular Sciences, Medanta – The Medicity, Gurugram. Trained at AIIMS New Delhi and in three fellowships in the USA.

Read Dr. Sheorain's profile →

This is general information. Please consult the doctor for advice about your condition.